Home > Won 39 T Boot > PC Wont POST With Extra RAM

PC Wont POST With Extra RAM

Contents

Reply to Calvin7 Tradesman1Dec 26, 2013, 3:45 PM Calvin7 said: Memory Manufacturer G.Skill FAQs:Q:I want to install more memory, in addition to my existing memory kit. I said please try vengeance on g41 because it has only two ddr3 slots. More importantly... (image from Makeuseof.com) ... How could I check this? navigate to this website

Junket, Crucial Moderator UK________________________How do I know what memory to buy?Shop for your region: US | UK | EU | France | GlobalI think my memory is bad. With what you did with the CMOS before try this instead - Unplug all power cord to PSUPress Power button on case a few times (not hold)take out the CMOS battery We use data about you for a number of purposes explained in the links below. Would you like to answer one of these unanswered questions instead? http://www.tomshardware.com/answers/id-1697420/boot-upgrading-ram.html

Computer Won't Boot After Installing New Ram

I went to the link provided but was unable to determine the best fit. after that we can talk about it. Lo and behold, we removed that stick and the computer ran fine with just one stick.

I hope I won't have to buy a new processor because I'll have to buy i5 under these terms. I'm still at a loss on what to do. 1tymSep 21, 2011, 12:27 PM sockofdeath said: Yes, I did clear it with the jumper. The old ram was 1.5 v, new ram is 1.35. Installed New Ram Black Screen Junket, Crucial Moderator UK________________________How do I know what memory to buy?Shop for your region: US | UK | EU | France | GlobalI think my memory is bad.

The single-sided sticks use high-density memory, which the DH57JG cannot support at the 4 GB capacity (it must not be capable of using memory chips above 256 MB).Unfortunately, the rep told Added More Ram Computer Won't Boot Ask a new question Related Resources solved [SOLVED] PC Doesn't Boot After Installing New RAM solved PC doesn't boot after adding extra ram the pc doesn't boot after seat the new Which is not impossible as I have seen boards that can do this. –DiscoveryOV Jun 19 '12 at 4:26 This bios flashing worked! view publisher site As Tradesman1 suggested, you may want to check w/ corsair, sending them a message about the ram.

Related Resources solved Computer won't post with new RAM. Laptop Won't Boot After Ram Upgrade So I returned it. With what you did with the CMOS before try this instead - Unplug all power cord to PSUPress Power button on case a few times (not hold)take out the CMOS battery Reply to jjs0891 ysbeerDec 24, 2013, 3:06 PM Hi, I tried the BIOS update with a bootable usb memory stick but it did not help unfortunately.

Added More Ram Computer Won't Boot

Everything worked fine with one of my old Rams. It only pops a command window for 0.1 seconds.Should I burn it to a disk and boot PC from disk? Computer Won't Boot After Installing New Ram solved PC doesn't boot after installing new ram solved PC Doesnt boot after new RAM PC doesnt boot up after I changed RAM Can't find your answer ? Installed New Ram No Display How many Ents were at the Entmoot?

Success!I hope this helps! http://wphomeguide.com/won-39-t-boot/pc-wont-start.php I tried two or three different brands of RAM, all of which met the appropriate specs (or so I thought). edit: The old RAM stick is 2GB G-Skill DDR3 CL9. Without knowing the specific model of your PC or motherboard, the best I can do is list the most likely possibilities and let you approach the problem from there. New Ram Computer Keeps Restarting

Thinking that the stick was faulty, I took it back for a replacement, but the replacement suffers from exactly the same problem! What can be causing the computer not to boot up with the new RAM sticks installed? solved Added more RAM to PC; computer just resets. my review here Thanks.

This saved my system, and it happened today.Thanks.. Upgraded Ram Windows Won't Boot Now after 2 weeks it wont Post. I should have returned it.

But would you by chance have the model of RAM you used?

Asus M4A89TD Pro/GSkill Ripjaws X DDR3-1600 solved Computer won't pass POST with new 8GB RAM module solved Computer won't post after reinstalling RAM solved My computer won't POST with both of Ask ! solved Asus M5A97 R2.0 wont boot up after installing new RAM memory Pc won't boot after installing new ram stick solved Computer unable to boot after installing new ram solved PC How To Adjust Dram Voltage Takes about 5 minutes to...

But at the very least, there is no way that with the information you supplied that you were able to put DDR2 and DDR3 interchangeably in the same slots. Try setting your ram clock to 166mhz in bios this will make your ram run at the same speed as your cpu because I suspect you have the 333mhz processor. Subscribe to my free newsletter for more great tips via email plus a chance to win some awesome prizes in my monthly tech gear giveaways!
RicksDailyTips Newsletter Archives

get redirected here Did you go into BIOS and manually set the correct voltage and memory timings?

You can't physically put a DDR2 stick in either of those slots for the board you mention. Tradesman1Jun 8, 2013, 8:37 PM Depends on the mobo, some put the BIOS files in a .exe file which basically unloads them like a .zip file then you have to run Ok, now, unplug , remove the battery and stick the ram cards back in . Reply to jjs0891 ysbeerDec 23, 2013, 1:44 PM jjs0891 said: don't really understand your second paragraph.You tried your new ram, but it give you "problems".So you installed windows 64bit, but then

there is no compatible 1333 Kingston with that board. All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get Good idea but tomorrow I'll want them to check which part is faulty. unfortunately still no joy.I checked the vDimm - and it's set to 1.8V - which should be good for this memory.I'm now wondering if it isn't the on-board graphics (ATI Radeon

Tradesman1Jun 11, 2013, 10:17 PM The Dram is DDR2 533, the 266 is true DRAM freq, but since it's DDR (DOUBLE data Rate) then it's true freq (266) times 2 = All Rights Reserved Tom's Hardware Guide ™ Ad choices Tech Support Forum Security Center Virus/Trojan/Spyware Help General Computer Security Computer Security News Microsoft Support BSOD, Crashes And Hangs Windows 10 Support No BSODs or random shut downs. Now it doesn't work with new ram, but works great with the old ones.

If you are POSITIVE that the old Ram is DDR2, and you are POSITIVE that your system worked fine with it, then you must be mistaken about the motherboard model number. Not the answer you're looking for?

© Copyright 2017 wphomeguide.com. All rights reserved.