if SMPS is ok then check your PCI slots 8. I am the sufferer for this. Was this page useful? Rebooted. navigate here
Figure : Startup Settings screen - list of options Wait until Windows opens. Diese Funktion ist zurzeit nicht verfügbar. If the monitor displays an image, you are done. Click Troubleshoot, then click Advanced options. http://support.hp.com/us-en/document/c03518095
Helpful +122 Report tiga Oct 20, 2009 at 09:57 AM my computer powers up all lights, fans, hdd and vga fan.. Sign up now. PS... There is a coin sized battery on your motherboard which provides enough juice to preserve you bios.
So here's what I did: Cleared cmos with jumper on mobo. If the monitor displays the first startup screen but does not display Windows, continue to the next step. Monitor won't Turn on and won't turn off. Pc Turns On But No Display Or Beeps Step 4: Reset and update the BIOS In case an item was changed in the BIOS, such as the primary monitor device setting, use the following steps to reset the BIOS
Step 8: Replace the video card or have the hardware serviced If you have tried all of the steps in this document and are still having the issue, the hardware is I mean I used lower rated equipment to ensure the psu wasn't being drained, the mobo seems okay as the ram test is carried out normally... After the monitor is connected, turn on the computer and the monitor. why not find out more Windows is not to blame.
Report hiranya- Dec 13, 2009 at 10:19 PM did u installed 3ds max 2010 recently???? Monitor Wont Turn On After Sleep Mode also blow out d dust out of de CPU with you yur blower if u have1. Rebooted. try some heat sink gel to the processor, and again ON your system.
Monitor is not on Make sure the monitor is on. If the monitor still displays a black screen or displays a No signal message, the video hardware may be faulty and needs to be replaced or serviced. Why Wont My Laptop Screen Turn On Turn on the computer and repeatedly press F10 until the BIOS setup utility opens. Computer Monitor No Signal still the same problem check the video or graphics card , if any 4.
This document is about troubleshooting a video connection from a monitor (or a TV being used an a monitor) to a personal computer. check over here Your computer might be different. Anmelden 327 Wird geladen... Ask the community! Computer Turns On But No Display On Monitor Or Keyboard
Press the Left Arrow key and select the File tab. If the newly attached monitor does not display anything, disconnect the cable and continue with Step 3: Inspect the video cable and video connectors for damage If the newly attached monitor Figure : Troubleshoot screen Click Startup Settings. http://wphomeguide.com/turn-on/monitor-wont-turn-on.php No pci cards inserted.
If you do not hear noise from the fans and the power lights on the computer are not on, the problem is related to the computer, not the monitor. Computer Turns Black After Startup Screen Continue Reading Up Next Up Next Article How to Safely Test the Power Supply in Your Computer Up Next Article What Does It Mean to Reseat Something in a Computer? Swapped the processor for a lower speed processor.
if its okay then try to change all the data cables. Turn on the computer and repeatedly press the F10 key for eight seconds. Or, at the very least, you'll be able to come into the shop with enough knowledge to avoid being played a fool. [Have a tech question? My Monitor Wont Turn On When I Start My Computer I generally don't recommend that readers try their own internal laptop hardware repairs.
ps: if you added anything new to the system like a PCI, AGP..anything. Once the computer is off, wait a few seconds and then try powering the computer on again. Nächstes Video CPU turns On but no display or post beep - Dauer: 7:34 Mitesh Patil 35.475 Aufrufe 7:34 How to possibly fix a PC that will turn on but will weblink Cleaned it.
In order to perform these steps, you must connect the computer to another working monitor.
© Copyright 2017 wphomeguide.com. All rights reserved.