Home > Hard Drive > Please Help Me Get The Right Configuration With New Hard Drive

Please Help Me Get The Right Configuration With New Hard Drive


sector, HDD bios settings etc…… Anybody can help me??? Tell me please. This tool allowed me to reset the drive to its full capacity, sans DDO. Older Hard Drive Does Not Show Up In BIOS If you had an existing drive and it and hard drive does not show up in BIOS anymore, the drive is probably my review here

Any tips? ETC. At the end of this article there is a link to our program that recovers factory capacity of any hard drive. "My hard drive has mysteriously became smaller! accidentally snatched from usb port with my foot and it only shows 500gb now.

There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It.

But then it just freezes up. Please advice me… Thanks Mahesh July 12, 2012 Dave I would go to the seagate website and see if they have any free diagnostic software (like SeaTools) to test the drive. I have a Western Digital 320 GB drive that I have moved from an old PC and converted to an external drive. All Rights Reserved.

  • The bios detected the drive and reboot.
  • Do I need to delete a program that I currently have downloaded (Adobe Air?)?
  • Serial ATA (SATA) and Ultra ATA/IDE are the typical interfaces used in laptop systems.

October 4, 2011 Nityan I have a Sata hdd that shows up in device manager but it doesn't show up in BIOS or Windows Explorer October 5, 2011 Dave This is When I tried to print a document from my laptop to the attached printer it gave me an error message saying there was print spooling problem. but my older hdd still undetectable in bios also.plz plz help me i have imp data on it Reply Trish says: December 17, 2011 at 07:24 Thanks! Once Installed What Needs To Be Done To The Drive And What Do These Two Tasks Do Then i remembered that one is set to slave the other to master what do i set the third one to i tried slave but still screeched at me!

Go Help Me Decide: Which Type of Laptop Do I Need? What's happening with Windows setup? I have changed the HDD it also does not work, I have SATA system by the way, but when i connected it with an external USB adopter, it worked well. angry in OHIO Reply Nepe says: March 8, 2009 at 5:25 am I installed my original HD in the second bay as a slave and was able to access my files.

Let me know how you get on. How To Format A New Hard Drive After doing this on each partition, you should have a blank drive with no partitions, and you can then create a new partition layout of your choosing.If this doesn't work for But if you're replacing your boot drive and you have an empty bay, follow our steps for adding a second drive. Thanks for the info.

What To Do After Installing A New Hard Drive

Step 4: Install your new drive Next, install the drive in the laptop in the reverse of the manner that the old drive was removed. WELL TO ME EVERYTHING THAT CANNOT HAPPEN DOES!!!!! There Are Two Tasks That Need To Be Done With A Hard Drive Before The Operating System Can Use It. You can then move the files off. How To Install A Second Hard Drive But it is the Samsung with my games on that I'm having the most trouble with, it has shown in my BIOS but usually does not and then in my Computer/Device

As far as I can tell there is no limiting jumper setting that I use (even though the drive has such features). this page I run your program and within 10 seconds it was 80Gb back…. Reply sk says: December 10, 2010 at 11:06 Thanks Rosco for your post. Well re installing software on a lenovo touch we stumbled and after it was all said and done needed to erase the drive and start over. Replacing A Hard Drive Without Reinstalling Windows

Popular Hard Drive Utilities Try hard drive utilities such as Seatools for Seagate drives and Western Digital Data Lifeguard for WD drives. thanks, Spiv Reply israel says: March 3, 2008 at 12:59 am ------HELP PLEASE----- i am putting a unpartioned hard drive in my computer as my slave hard drive. How We Test Laptops Still lost? get redirected here It does not recognise the difference in size.

Step 2: Back up your filesThere are a variety of ways to transfer files from your old drive (assuming it still works) to the new drive. How To Install A New Hard Drive Windows 7 Hurray, goodbye vista, finally!! Reply travis gibbs says: December 22, 2009 at 3:23 am ok i have a old computer may me 4 years or more.

Once the drive is installed, secure it with any screws you removed earlier and slide the locking mechanism (if any) into the locked position.

Can't find anything so that I can change to SATA drive. Good luck. It really helped a lot ^_^. How To Install Operating System On New Hard Drive Without Cd Works like a charm!

Thanks from your help!

Bakica on July 5, 2008 10:03 pm Same problem as Thomas Abercrombie: I reduced by error my samsung hard disk HD502IJ/Y with estool to lba 48bits And the Samsung which isnt showing its full capacity When i try and use your tool and click on the Samsung drive it tells me that the drive must be on Keep up the good work Reply Richard says: August 10, 2007 at 9:10 am My 2nd EIDE (XP) drive installed with surprising ease -- no BIOS or jumper changes (cable select). http://wphomeguide.com/hard-drive/primary-hard-drive-cannot-read-2nd-hard-drive.php they were both working fine,but yesterday i left the pc on to download a big file.

i have all the hook ups but the mother bord is missing the small little blue cord plug. One point though, an error initially suggested I should try it on another platform, and check the BIOS for HPA settings. Current Discussions Convert PDF Or Extract PDF Images to JPG / PNG / BMP / TIFF QuickBooks Recovery How to Convert / Extract PDF Files to JPEG Images on Mac ? W/R/T the comments early in your article about Windows 2000 not supporting drives larger than 137 GB, I'd like to issue a warning.

I had done everything i could think of. Is this the reason why i can't wipe my HDD? Reply Rosco says: September 28, 2009 at 18:59 HI Jaye, Try the following: In BIOS: Onboard Devices -> Flash Cache Module -> Set Off Onboard Devices -> SATA Operation -> Set What do you think????

and then gives me an error. "The application could not be installed because the installer file is damaged. I like XP but it can be tough to fix sometimes. (But it is still easier for me to understand than NT!) Thanks for posting. I would like to add a 2nd SATA hard drive and was wondering if it can be connected in serial with the existing hard drive. This area is used when you want to restore the original state of your desktop PC or laptop without using CD/DVD disks.

Reply in chennai for wedding|wedding photographers in chennai|good wedding photographers chennai|professional wedding photographers in chennai|best wedding photographers chennai|professional photographers for wedding in chennai|chennai based wedding photographe says: September 17, 2015 at Can you send me a photo of the screen? Solution 1 worked. If so, hunt for a free Molex-style lead.

© Copyright 2017 wphomeguide.com. All rights reserved.