Home > Hard Drive > OS Unable To Load With New Slave Hard Drive Installed

OS Unable To Load With New Slave Hard Drive Installed

Contents

After digging through the depths of Google, I ran across this post, and your link to the Microsoft technet document FINALLY got me back up and running again.Thank you a million It was so easy and now my son-in-law's computer works great. Reply Dave says: November 24, 2008 at 1:34 pm Hi I bought this on Ebay, it works realy well, you can connect any hard drive to a usb socket. After finding your article, written so I could understand it, I gained the confidence I needed to do it. http://wphomeguide.com/hard-drive/original-hard-drive-as-slave-no-access.php

Press or F4 to enter RAID utility 1 WDC WD10EADS-00L5B1 WDC being the new drive on Port 1 of the SATA controller of course. Problem is , that there is very little space left on the system drive. The first hard drive is SATA, the second which came from an older computer is IDE. What's New? http://www.techspot.com/community/topics/os-unable-to-load-with-new-slave-hard-drive-installed.39170/

Windows Won't Boot With Second Hard Drive

Reply Joshcore says: July 31, 2007 at 3:07 am ^ well if it's not too hard for you to understand, why did you bother posting anything in the first place? I can’t open the main file on the drive because it is password protected. PLEASE HLPE Reply Michael says: October 24, 2009 at 7:02 pm GREAT THANKS!!!!!!! Thanks a lot!

Reply Jimmy says: December 1, 2008 at 8:49 pm Thanks, I was having an issue initializing my second SATA hard drive. Primary (C:) drive installation during Windows 7 setup: Make sure your drive is detected by your controller or in BIOS during bootup. Just rock it back and forth (lengthwise along the narrow side of the drive), taking care not to rip the connector off the drive. Installed A New Hard Drive Now Computer Won't Turn On This will prevent frustrations about losing programs after you have already formatted your computer.

Took me hours of wading through other websites of gobbledygook to get nowhere. Report champ- May 28, 2013 at 05:17 PM ahhhhhh yeaaah! If you want a single partition (single drive letter), click on Next and your hard drive will be automatically partitioned and formatted as NTFS and Windows Vista will continue installing. http://www.vistax64.com/vista-account-administration/158478-unable-load-my-os-after-installing-new-hard-drive.html Please help.

All Rights Reserved Tom's Hardware Guide ™ Ad choices Join Now Help Remember Me? Windows 7 Won't Boot With Second Hard Drive So now the data connects by SATA instead of IDE. what do i need to do in order to make it work in different motherboard? However it is not appearing in ‘My Computer', even though I'm using Windows ME?

Installed New Hard Drive Windows Won't Boot

However, I really don't understand why, because the power supply in the computer (bought in 2010) is rated at 500W/450W (peak/max) and this second HDD is the only extra component I've If it does not verify the connections are secure. Windows Won't Boot With Second Hard Drive If I'm replacing my hard drive I understand that in order to clone the hard drive I need to have the new hard drive act as the slave drive which I Installed New Hard Drive And It Wont Boot In Windows 2000/XP/Vista, your new drive will not appear at all in My Computer until you format it.

And/or can I use one SCSI drive and one EDI drive on this computer? (it does have the hook ups for both types of drives. http://wphomeguide.com/hard-drive/networking-laptop-with-desktop-slave-drive.php hello!!! Once Windows is installed, opening "My Computer" will display the additional partitions as drive letters. Report Margitta 4Posts Monday March 16, 2015Registration date March 16, 2015 Last seen - Mar 16, 2015 at 02:11 AM I have 8 GB for ram. Computer Won't Power On With Hard Drive Plugged In

Reply Johnny says: December 6, 2008 at 5:19 pm Not sure what all the fuss was about in some of your earlier posts, but you made this post easy to understand. In almost all cases, you will want to work with the bottom window. Most motherboards have two IDE channel connectors. click site Insert the removable media containing the driver into your PC, and click OK.

If NOT, they can set the wrong partition inactive and mark the right partition active. Windows Won't Boot Without Second Hard Drive For example, I'm assuming it should boot from the SSD and that's where your OS is located, but if the HDD is set at a higher priority and is connected, it Does he need an actual Windows Vista disk instead of the ones you make when you first get the computer?

It's quite happy if I use a second power cable for the 4th.

Reply Kyle says: November 9, 2007 at 2:12 am Well I just wanted to say that i have been struggling with my sata HD for over a week now. Everything in BIOS was good. Find and enable the default setup option, which could be Load Optimal Defaults, Get Default Values, Load Optimized Defaults, Load Setup Defaults, and so on. You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit Insert the Windows 7 DVD into the DVD-ROM drive and restart the system.

Many thanks. NOW I can change the security settings on the drive. It works on the second or third try after waiting. navigate to this website But thankyou for the time you put into posting this info..

Now that SATA is becoming much more prevalent than IDE, it is becoming a lot less likely that you will need to worry about jumpers during this process. Tom Reply Scott says: January 27, 2009 at 2:01 pm Great, thank you!

© Copyright 2017 wphomeguide.com. All rights reserved.