by R. however, when i installed the HDD, the system didn't work? It might see the second drive that Windows missed. and my standard ATA100 drive is a secondary. Check This Out
today i found that my older WD isnt working/spining just as no power is going into it i tried to change cables but still, its the hdd fault. I have changed the cell of motherboard and reset the bios but still no positivity. My hope is that using the SATA drive for my OS installation will get rid of this problem but I don't really know if it will... SATA's physical connectors for consumer computers have remained the same throughout this evolution. http://www.techspot.com/community/topics/making-sata-primary-driver-when-it-is-my-only-hard-drive.97064/
The sticks do, but not this hard drive. For now your old drive will have to be used for storage. Behaviors of boards with both PATA and SATA sockets depend on the motherboard firmware and BIOS.
Even for a non-too compuer literate such as myself! If you are simply installing a secondary drive, boot into Windows. Maybe try a BIOS update for the mobo…there's probably a new BIOS since the computer is so old. How To Make External Hard Drive Primary Is it possible that severe partition problems have caused the drive to be undetectable by the BIOS (I have never heard of such an occurrence)?!
Join the community here. How To Make Ide Boot Instead Of Sata In Windows 9x/ME, it will appear, but you will need to right-click on the new drive and choose "Format" from the menu. and what I get... http://www.tomshardware.com/forum/167877-32-make-sata-boot-issues The posting of advertisements, profanity, or personal attacks is prohibited.
The way flash storage is speeding up this may become an option again in the future, but I am not aware of anything on the horizon. Which Portion Of The Bios Manages Essential Devices Before The Operating System Is Launched? seems that bios is not recognizing it.. Can I replace the 6g with the 40 safely. Or the computer?
However, you can use Win Hex and our tutorials to find out what is missing or wrong with the drive. http://knowledge.seagate.com/articles/en_US/FAQ/168595en/ Already have an account? Sata Hard Drive Not Detected In Bios Or Setup Either way, it does sound like your drive it shot. How To Connect Ide Hard Drive To Sata Motherboard If you do not have any bad sectors then move to option 2. Download the Recover It All Now data recovery software and run the demo.
All is good except for the fact that my hard drive has a "C" and an "I". his comment is here Absolutely. The Sabrent 2.5" IDE enclosure will accommodate your Maxtor drive. Please see the link below. What about if you have a IDE hard drive and you upgraded it with a SATA adapter? reply quote 2 months agoJames B This would not be an issue for any modern cloning software. reply quote 3 months agoAlex I am trying to find a solution for a Motherboard With Ide And Sata Ports
If you find out any good info, please let me know...thanx!Regards,Robert Flag Permalink This was helpful (0) Collapse - Sata is primary by edersch / July 28, 2005 9:26 AM PDT Shubham April 3, 2016 3:43 am Reply # In computer management my pen drive not showing please help Bhaaskar July 11, 2016 2:29 am Reply # Hi, Few months back i Any help you can provide would be appreciated. http://wphomeguide.com/hard-drive/primary-hard-drive-cannot-read-2nd-hard-drive.php The hard drive that the system boots from is usually the primary master.
Sorry for the dumb question but is there really such a thing anyway?? How To Turn An External Hard Drive Internal turn on computer with the win xp disc in the cd-rom. it is the only drive in the machine, i hav installed it and it is working but it only shows a 127GB capacity in windows xp.
If not, you can extend it using a controller card just the same way as with IDE. Ask ! This would really depend on the type of converter you have. If your converter also supports USB power, then your 2.5 HDD drive would be powered by the computer. If you Install Os On External Hard Drive I have a dell demension 8200 desktop which was seriously infected where I could not do anything with it.
Any help or suggestions please? Flag Permalink This was helpful (1) Collapse - It's all about the controllers by DJPython / July 22, 2005 5:53 AM PDT In reply to: Mixing SATA and IDE drives in jQuery © 2008 John Resig Reproduction of OSNews stories is permitted only with explicit authorization from OSNews. navigate here XP explorer and device manager show SATA hard drive I installed but it doesn't show up in BIOS.
Hard disks have passed through a long evolution of connectivity and data transfer standards. This was more than Helpfull in my Latest Conquest!!! Elia Rei March 16, 2014 6:13 am Reply # Can I fix this problem by reinstalling Windows XP? Found this: Roderick van Domburg's explanation (Systems analyst at Peterson SBS): During booting, Windows resets the USB port and loses your boot device.
I recommend you join our forums and this question there-it might take some time to sort this out. It is showing in disk manager, but i am not able to do anything on that. The hard drive was a 250 GB and it died so I replaced it with a new hard drive which is 1 TB. To answer your questions do these drive need to be formatted; Yes, assuming they are not partitioned and formatted already.
If the hard drive is ‘bad' then it will take some nicer tech guy to perform TRUE data recovery and not just NEW hardware. I've run the Seagate tool package, which says the drive fails a key test, so I'm now trying to just clone it to get the important data off of it - Thanks a lot. If this is the case, would I simply be better off mounting it in a new external enclosure?
My computer worked fine i have had it for less than 2 years. successfully installed second hard drive thanks to this post 🙂 Reply Joe says: August 23, 2009 at 11:14 am I have a 320 gig IDE hard drive .Im trying to install David Morgan December 22, 2015 6:05 pm Reply # Well downloaded the surface scanner……does not function..just sits there,, pushing various buttons (mount,, nothing,,,scan,, please mount a drive first, etc.. What is IDE ?
I've looked all over but couldn't find anything related to this issue online.I finally read your post and remembered that was how I had altered it before(accidentally, about a year and Cheers! Some move a drive like that and hope the software keeps running (from the old drive). Most motherboards have only PATA or SATA data connector sockets.
I always try to ascertain if that is actually what is occurring or if it is more that the drive no longer has a drive letter attached to it. Thanks for your time Reply Mitch says: August 17, 2007 at 3:58 am Thanks alot, THE BEST step by step tutorial that I have found. or would i have to clone it? See ya on the forums!
© Copyright 2017 wphomeguide.com. All rights reserved.